G1H and G1V Supply Grilles & Registers

• Extruded aluminum construction
• G1H - horizontal face bars
• G1V - vertical face bars
• Adjustable single deflection
• 1 - 1/4" nominal face margin
• Available with face adjustable opposed blade damper

C1L, C1S, C2L, C2S, C3, C4 Curved Blade Ceiling Grilles

• Extruded aluminum construction
• Adjustable curved vanes in 1, 2, 3, and 4-way patterns
• Available with aluminum opposed blade damper
• 1 - 1/4" nominal margin
• Available in white paint or satin anodized finish

GFX Series Return Grilles & Registers

• Extruded aluminum construction
• Available with 0° or 40° deflection on the face bars
• 1 - 1/4" nominal face margin
• Available with face adjustable opposed blade damper
• Standard finish for GFX series is white paint or satin anodized

NGAG5F Filter Grille

• Extruded aluminum frame will hold 1" nominal filter
• NGAG5F has 1/2" x 1/2" x 1/2" aluminum grid core
• Face is hinged to filter frame
• Removable face for cleaning
• Satin anodized or baked white enamel finish
• Sizes from 4" x 4" to 48" x 48"

GAG5, TBAG5, GAG5C Return Grilles & Registers

• Extruded aluminum margin with 1/2" x 1/2" x 1/2" aluminum grid core
• Available with 1 - 1/4" nominal margin , U-channel margin or core only
• Sizes from 6" x 4" to 48" x 48" in one piece construction
• Available with face adjustable opposed blade damper
• Available in white paint or satin anodized finish

DG2 and DG2-Y Transfer Grilles & Frames

• Extruded aluminum construction
• Inverted (Y or V) type bar for vision proof quality and air flow
• One piece trim frame available for framing back of door
• Adjustable from 1 - 3/8" to 1 - 3/4" door thickness
• Sizes 6" x 4" to 36" x 72"
• Satin anodized finish

RDG/MRDG

• Extruded aluminum construction
• Extruded vanes spaced 3" on adjustable tension bolt pivots to firmly hold deflection settings
• MRDG available with split vane design
• Integral opposed blade damper available
• Pattern vanes easily adjust to reduce throws by 35%
• Rotating barrel has 60° total movement, 30° up or down from the horizontal center line
• Mill finish is standard, optional are satin anodized or white paint finishes
• Available in sizes 6" x 12" to 15" x 72"